Skip to content

New Stuff from Pivot, HT and Chromag

Revolution Products drops by with a carbon Pivot 429 with new geometry and dw-link suspension, plus new gear from HT and Chromag.

Photo from “New Stuff from Pivot, HT and Chromag”
Photo: Jake Mein

Photography Jake Mein

Words

Published

Read time 2 min

Okay so it's not all new stuff, but Chris from Revolution Products stopped by the office a couple of days ago with a few new things in his car, notably this complete 100m travel Carbon Pivot 429... This thing is pretty darn rad, Pivot have taken given the carbon 429 all new geometry, a revised dw-link suspension design and the same Pivot hollow box internal molding technology developed on the Carbon Mach 5.7.

142mm rear spacing with 12mm through axle and 160mm post mount dropouts for maximum frame stiffness.

Photo: Sven Martin

New under top tube internal shift cable routing with clean brake and dropper seat post routing.

Photo: Jake Mein

Rubberized leather chainstay, inner seat stay, and down tube protectors for a quiet ride and higher impact resistance. New ISCG 05 (chainguide) mounts included on frame.

Photo: Jake Mein

Tapered 1.5” headtube, PF92 bottom bracket, and direct mount front derailleur.

Photo: Jake Mein

Chris also had the new Pivot Less 29er hardtail with him... Its a bike that was made by demand, as a lot of Pivot's more XC orientated customers really didn't want to ride someone else's hard tail and pleaded with Pivot to produce one, the result being this amazing well resolved geared or single speed frame.

Photo: Jake Mein

Like the 429c top tube cable access port the Less features an access port under the BB to aid in the set up of cable routing. It also has a massively stiff 92mm press fit bottom bracket and direct mount front mech.

Photo: Jake Mein

The standard LES dropouts (included with every frame) are full molded hi-mod carbon fiber featuring a 142 X 12mm through axle, post style disk brake mounts and a replaceable derailleur hanger. These cleanly integrate into the frame giving little hint that the dropouts are removable. The design is also another contributor to the frames amazing stiffness and performance.

Swinger Patent Pending adjustable single speed System: Single speeders can rejoice with this design. It’s light, simple to adjust and really sets a new bar for single speeders. The system provides quick, consistent, indexed chain adjustments for single speed use along with fast wheel changes and no change in brake adjustments. The design works with bolt on or quick release single speed disc brake hubs. The Swinger dropouts are cold forged aluminum and feature a rear chain tension adjuster with a spring loaded ball bearing detent design. The rider can make quick gear changes and adjust the chain tension evenly on each side. The adjust features 4 clicks per rotation for counting off even adjustments per side. The adjusters cannot self loosen and will not allow the axle to slide forward.

Now i'd seen pictures of these HT AE01 pedals but had never actually seen a set in the flesh. Thing is they are so rad i almost want to switch back to flats! at 358 grams a pair they spin on a CNC machined cr-moly spindle and dual DU bushes and a bearing.

Photo: Jake Mein

And this is more of a reminder really that Chromag's ever popular 780 OSX Fubar is still here and available in a range of colours.

Photo: Jake Mein

All of these products are available at your local dealer as well as online at kingpinbikes.co.nz

Comments

Be decent. Be a dick and we’ll delete it.

    Two print issues a year, with FREE NZ Post delivery. Pre-order discount until 1 January.

    Pre-order

    COVER PHOTO ANNOUNCED JANUARY 29TH